Author Topic: Batman 66 - New Code v1.05.0  (Read 92 times)

Online WhiskeyTangoFoxtrot

  • Level 7: Khaaaan!
  • *****
  • Join Date: Apr 2015
  • Location: Orlando
  • Posts: 1739
  • It's showtime!
Batman 66 - New Code v1.05.0
« on: November 06, 2019, 05:20:05 PM »
Read Me:
https://sternpinball.com/wp-content/uploads/2019/11/batman-1_05_0-README.txt

V1.05.0 - Nov. 7, 2019
======================

  - Joker #2 switch will no longer complain in the tech alert, as some games
    were made without this switch.
  - Fixed the size of the "HOW TO PLAY PINBALL" video clips in attract mode
    so they fit properly inside the TV.
  - Reversed the top lane lamps for skill shot so they now follow the flow
    of the ball.
  - Added compensation for game features when the shooter lane switch is
    not working. Inhibit right loop and left loop switches from being scored
    when the shooter lane switch is bad (the skill shot switch is used for
    backup).
  - Added SLE speech.
  - Added support for the coin door interlock switch.
  - Updated to system v2.35
    - Updated to nodeboard firmware v0.52.0
    - Added Standard Adjustment "MAX PLAYERS PER GAME".  Values are 1 to 4,
      with a default setting of 4.  This can be used to limit the number
      of players that can be added to a game.
    - Added Service Menu selection UTIL->ENDGAME.  This selection is only available
      when there is an active game.  When selected the operator will be prompted
      to confirm that they wish to end the current game.  Once confirmed and upon
      exiting the Service Menu, the game will be in attract mode.
    - Added Standard Adjustment "ALLOW LEFT+START TO END GAME".  Values are:
      "NEVER", "FREE PLAY ONLY", and "ALWAYS".  Default value is "NEVER".
      During an active game, if the LEFT FLIPPER+START BUTTONs are held for
      two seconds, the game will be ended.
    - Added Standard Audit "TOTAL PLAYS ENDED", which will track the number of times
      a game is ended via the Service Menu or FLIPPER+START BUTTONs.
    - Added Standard Adjustment "CREDIT FORMAT".  Values are:
      "ACTUAL FRACTION" and "REDUCED FRACTION".  Default value is "REDUCED FRACTION".
      For a USA coindoor when inserting three quarters:
        "REDUCED FRACTION" would display "1/4", "1/2", "3/4"
        "ACTUAL FRACTION" would display "1/4", "2/4", "3/4"
    - Update Italian translation of "ENTER INITIALS" to "INSERISCI LE TUE INIZIALI"
    - Updated instructions for RESTORE SETTINGS.
    - Reordered items in UTIL->VOL, moved CABINET SPEAKER TYPE to be after
      BACKBOX SPEAKER TYPE.
    - Added UTIL->RESET->VOL which will reset all audio settings to their
      default values.
    - Append (MAX) to the credit message if the number of credits equals
      the CREDIT LIMIT adjustment.

Code:
https://f002.backblazeb2.com/file/gamecode/batman-1_05_0.spk.zip
How many points is "TILT"?

Offline k7

  • Level 10: Timelord
  • *****
  • Join Date: Jan 2010
  • Location: ɐp¡ɹ0|ɟ ɥʇn0s
  • Posts: 19107
Re: Batman 66 - New Code v1.05.0
« Reply #1 on: November 06, 2019, 06:02:27 PM »
they don't have much to fix :)

shameless bump. we have 2 floor model versions of catwoman batman 66. they're sitting down in our satellite store, but at least 1 or 2 will be back in the jupiter location next week.

call dave if you want to grab one to use to install this FREE update. :P
WTB:  Goin' Nuts (10)              Bigfoot (2)
                Cabin Fever (1)          Nosferatu (10)
                      Richie Rich (1)        Wrath of Olympus (6)
         
       ...and basically anything 50% off eBay/painside value

Offline DEXTER

  • Level 4: Cobra Kai
  • ****
  • Join Date: May 2016
  • Location: Ponte Vedra, FL
  • Posts: 394
Re: Batman 66 - New Code v1.05.0
« Reply #2 on: November 06, 2019, 07:31:51 PM »
Batman 66 - my favorite Stern keeps getting better!