Author Topic: Are these still available?  (Read 780 times)

Offline tcrouch

  • Level 4: Cobra Kai
  • ****
  • Join Date: Nov 2010
  • Location: Jacksonville, Fl
  • Posts: 286
Are these still available?
« on: June 14, 2011, 10:36:37 AM »
I need at least one resistor/cap network for a system 11 CPU board. 4.7 kOhm/470pf I believe is the correct one. If anyone knows where to get them, please let me know.
1972 Gottlieb Grand Slam, 1972 Bally Nip-it, 1987 F-14 Tomcat, 1974 United Golden Triangle shuffle alley

Offline Flipincrazy

  • Level 3: Hologram
  • ***
  • Join Date: Jul 2010
  • Location: Hollywood, FL
  • Posts: 214
Re: Are these still available?
« Reply #1 on: June 14, 2011, 02:26:52 PM »
The resistor/cap networks are not readily available.  However, you can probably use a straight resistor network in its place without the caps.  Which network are you replacing on the 11 board?  If you need a straight resitor network I can send one too you.  If you need res/cap, you can make one.

Dan
Pins:  TZ, FH, RFM, TAF,TSPP, Joker Poker, Sinbad, BOP,  Fathom, Centaur, Space Invaders,, FB Classic,  Cyclone, Big Chief, Extra Innings, Bronco, Beat the Clock (WMS)

Offline tcrouch

  • Level 4: Cobra Kai
  • ****
  • Join Date: Nov 2010
  • Location: Jacksonville, Fl
  • Posts: 286
Re: Are these still available?
« Reply #2 on: June 14, 2011, 11:31:57 PM »
I need to replace src3. Long story, but it isn't salvageable.  :-[
1972 Gottlieb Grand Slam, 1972 Bally Nip-it, 1987 F-14 Tomcat, 1974 United Golden Triangle shuffle alley

Offline tcrouch

  • Level 4: Cobra Kai
  • ****
  • Join Date: Nov 2010
  • Location: Jacksonville, Fl
  • Posts: 286
Re: Are these still available?
« Reply #3 on: June 23, 2011, 12:07:23 AM »
Thanks for the info. I'll just replace it with a straight resistor network, then. Just for future reference, would you just put the cap on the common side of the bussed resistors?
1972 Gottlieb Grand Slam, 1972 Bally Nip-it, 1987 F-14 Tomcat, 1974 United Golden Triangle shuffle alley