The Village BBS

Florida Arcade and Pinball Collectors => Buy/Sell/Trade/Auction => Topic started by: k7 on June 09, 2019, 09:33:58 AM

Title: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 09, 2019, 09:33:58 AM: i have a feeler out for someone to burn them, but figured somebody might have a junk board and can mail out these 2 roms for some $ $ $. :)

also need a button for a cocktail nintendo control panel, while you're digging thru that barn/shed/storage bin. ;)

i might shove a pacman rom in there. curious to see how ms pacman will deal with ladders and kong.

chasing an annoying line issue. the Braze Tech guide says chip 3P (2716) is bad. i don't even have a 3P location on my 4 board stack. but the 5H and 5K have leg issues, so replacing them is a must-do.
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: Neilhdz on June 09, 2019, 10:06:52 AM: Actually... i may have the button. Need to check in storage
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 09, 2019, 11:14:51 AM: awesome. :)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: WannaTheater on June 09, 2019, 03:45:57 PM: I have one orange and two blue buttons that I just replaced from DKJr.
The blues are pretty grungy and off color (I didn't try to clean them up).
The orange color is pretty good. And would probably shine up nicely with some Novus.
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 09, 2019, 06:01:24 PM: Quote from: WannaTheater on June 09, 2019, 03:45:57 PM
I have one orange and two blue buttons that I just replaced from DKJr.
The blues are pretty grungy and off color (I didn't try to clean them up).
The orange color is pretty good. And would probably shine up nicely with some Novus.

from an upright or cocktail? the cocktail buttons are different. :)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: WannaTheater on June 10, 2019, 01:06:26 AM: They are from an upright.
I thought buttons were buttons.... my bad.
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 10, 2019, 10:16:28 AM: Quote from: WannaTheater on June 10, 2019, 01:06:26 AM
They are from an upright.
I thought buttons were buttons.... my bad.

still a thank you from me. :)

the c/t buttons are like this:
(https://i.ebayimg.com/images/g/fYUAAOSw5k1cahfH/s-l1600.jpg)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: DanielR on June 10, 2019, 11:37:29 AM: Hello K7. I recently purchased 10 DK eprom sets and donâ€™t mind giving you a complete one but donâ€™t see a 5H or 5K. It says here that Radar scope boards converted to DK could be different ones or is a 4 board.

https://www.brasington.org/arcade/tech/dk/

If you can use a regular 2 board set, let me know itâ€™s free for you.
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 10, 2019, 01:35:01 PM: awesome daniel, thank you. the board in my cocktail is a TKG-3 revision, 4 board stack. i think that's why chips and other help from the braze site is leading me in circles.

i think a tkg-3 board is legit donkey kong...but that's an assumption. i'm not sure how they marked the radarscope PCBs from nintendo.

i took 5H and 5K off my video board...they were marked as such. i wonder if i can figure out what they would relate to on a 2 board stack. or in your rom kit.

PM sent. :)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: HammysHangout ( Hammy ) on June 10, 2019, 01:41:59 PM: neil is the dk tech god, he should be able to fix it :D

he was doing a video stream last night of his skillful use of needle nose pliers :D
Title: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: Neilhdz on June 10, 2019, 07:53:56 PM: Quote from: Hamster on June 10, 2019, 01:41:59 PM
neil is the dk tech god, he should be able to fix it :D

he was doing a video stream last night of his skillful use of needle nose pliers :D

And i got the job done

Also k7 ... dannys roms will work. Heres the set up.

(https://uploads.tapatalk-cdn.com/20190610/82ceb42440d819be6a042fa78a3c36ea.jpg)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 11, 2019, 12:01:06 AM: nice. different from the brasington link i checked out. ;D and sweet. there's the "missing" 3P location i could not convert to a 4 board stack version's location. friggen awesome.

but rusty 5H and 5K no es bueno...i learnt, as junior tech, when you lose leg...swim from shark no work so well. you do circles. :P

you find button now? :o
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: HammysHangout ( Hammy ) on June 11, 2019, 09:05:11 AM: Quote from: Neilhdz on June 10, 2019, 07:53:56 PM
And i got the job done

See! you are good for something :D
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: Don Panetta aka 404 on June 12, 2019, 11:36:16 AM: The nintendo button caps look exactly like the Taito button caps. I Looked in my box of junk in the garage. I found a taito red one if you want to give it a try. Free of course

(http://i.imgur.com/AqCS9WRm.jpg) (https://imgur.com/AqCS9WR)
(http://i.imgur.com/NqGRI6wm.jpg) (https://imgur.com/NqGRI6w)
(http://i.imgur.com/DxlyjNTm.jpg) (https://imgur.com/DxlyjNT)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on June 15, 2019, 08:52:05 AM: In London (itâ€™s too proper over here, so I had to come over and mess things up for them)

so slow to respondâ€¦ Thank you

Iâ€™ll PM you my addressâ€¦ And take care of postage when I get back in town :)
Title: Re: WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.
Post by: k7 on July 15, 2019, 03:01:18 PM: thanks to don, i have a cocktail button now. appreciate that. :)

when it cools down to 90 degrees, i'll tackle the cocktail again. i have a minor 5H socket issue, i think, but really not interested in further troubleshooting.

just a red box around pauline on some levels, and mario's colors are just a bit off.