Author Topic: need monitor help on Dr.Mario/Nintendo cab  (Read 797 times)

Offline sapper

  • Level 2: Villager
  • **
  • Join Date: Feb 2012
  • Location: Lutz
  • Posts: 64
need monitor help on Dr.Mario/Nintendo cab
« on: January 09, 2013, 01:00:15 PM »
Ok, wanting to fix up the wife's Dr.Mario, going to start with the monitor, two questions. First the monitor is darker on the left side, and lighter on the left side, also there is some bleeding going horizontally across the monitor, not colors, just like a black shadow. Second question the colors are inverted, I have seen this https://www.mikesarcade.com/cgi-bin/store.pl?sku=NININVAMP would this fix it? Thanks in advance. P.S. also looking for a few parts to fix the cab up, looking for a matching coin mech face-see bottom pic, mine are mix matched and the skinny white t-moulding for both sides


       
Dr.Mario Nintendo Vs. System, 25" Xbox arcade, Sega Bass Fishing Blast City Cab

Offline micksimmonds

  • Level 10: Timelord
  • *****
  • Join Date: Dec 2000
  • Location: U.K
  • Posts: 13282
    • FREEPLAY FLORIDA 2016 - Bigger, Better ;-)
Re: need monitor help on Dr.Mario/Nintendo cab
« Reply #1 on: January 09, 2013, 01:17:46 PM »
Mike I think I have a matching coin mech to the left side of the coin door, I might have some left over T Molding as well, just fired it up in MAME and the colors seem to match what you have on your game, so do not think the colors are inverted, and probably worth getting a cap kit done, bring it down to AJ and get him to cap kit etc and swing by, by the time you been here and grabbed stuff, monitor will be fixed :)
FREEPLAY FLORIDA
Check out http://www.freeplayflorida.com and on facebook - http://www.facebook.com/freeplayflorida