Author Topic: NGG slam ramp issue  (Read 936 times)

Offline 0geist0

  • Level 7: Khaaaan!
  • *****
  • Join Date: Jan 2012
  • Location: Royal Palm Beach
  • Posts: 1469
NGG slam ramp issue
« on: November 08, 2012, 07:45:00 AM »
I have a problem with my slam ramp adjusting screw. The one that locks it into position and keeps it from moving north and south. Seems there is no way to lock it down so it works loose. I thought about putting a small dab of locktite on it but not sure if it would be wise. Any suggestions?
Pins, Stern Star trek Pro. Stern Mandalorian Premium, Stern Godzilla Pro.

WTB A small island
FS  My bad Ideas

Offline EDC

  • Level 7: Khaaaan!
  • *****
  • Join Date: Feb 2010
  • Location: Coral Springs, FL
  • Posts: 1107
Re: NGG slam ramp issue
« Reply #1 on: November 08, 2012, 11:14:25 AM »
I'd use blue loctite, I always had problems with screws coming out on the slam ramp.
Pins : TRON LE, IM, AVATARLE, ACDC Pro, RBION, STERN PB, STTNG , TS, RG, RBG, W?D, MA, WW, Secret Service, ARENA, Fire! (#2)
For Sale : Arcade monitors, "Gold"eneye, Diner, RBG
Wanted: BBH, Robowar, EBD

Offline 0geist0

  • Level 7: Khaaaan!
  • *****
  • Join Date: Jan 2012
  • Location: Royal Palm Beach
  • Posts: 1469
Re: NGG slam ramp issue
« Reply #2 on: November 08, 2012, 12:17:38 PM »
that's what I was thinking, or a small dab of paint
Pins, Stern Star trek Pro. Stern Mandalorian Premium, Stern Godzilla Pro.

WTB A small island
FS  My bad Ideas

Offline SHOPOFGAMES

  • Show Organizer
  • Level 8: Psi Corps
  • *****
  • Join Date: Jun 2008
  • Location: Fruitland Park FL
  • Posts: 2297
  • CURLY
Re: NGG slam ramp issue
« Reply #3 on: November 08, 2012, 12:58:20 PM »
If you are talking about the long hex wrench screw, then it is suppose to have a nylon lock nut on the threaded end.

Curly

Offline 0geist0

  • Level 7: Khaaaan!
  • *****
  • Join Date: Jan 2012
  • Location: Royal Palm Beach
  • Posts: 1469
Re: NGG slam ramp issue
« Reply #4 on: November 08, 2012, 01:35:08 PM »
If you are talking about the long hex wrench screw, then it is suppose to have a nylon lock nut on the threaded end.

Curly
that would be the one,
« Last Edit: November 08, 2012, 01:41:49 PM by 0geist0 »
Pins, Stern Star trek Pro. Stern Mandalorian Premium, Stern Godzilla Pro.

WTB A small island
FS  My bad Ideas

Offline k7

  • Level 10: Timelord
  • *****
  • Join Date: Jan 2010
  • Location: ɐp¡ɹ0|ɟ ɥʇn0s
  • Posts: 22788
Re: NGG slam ramp issue
« Reply #5 on: November 09, 2012, 09:41:14 AM »
loctite, or find that nylon nut to buy.

loctite will keep it from vibrating loose. you can still unscrew it as needed. :)
WTB:  Goin' Nuts (10)              Bigfoot (2)
                Cabin Fever (1)          Nosferatu (10)
                      Richie Rich (1)        Wrath of Olympus (6)
         
       ...and basically anything 50% off eBay/painside value

Offline 0geist0

  • Level 7: Khaaaan!
  • *****
  • Join Date: Jan 2012
  • Location: Royal Palm Beach
  • Posts: 1469
Re: NGG slam ramp issue
« Reply #6 on: November 09, 2012, 12:47:35 PM »
A #8 Toyota tail light nut works perfectly
Pins, Stern Star trek Pro. Stern Mandalorian Premium, Stern Godzilla Pro.

WTB A small island
FS  My bad Ideas