WTB: donkey kong roms, 5H and 5K, on the video board...and jump button for C/T.

[k7]

i have a feeler out for someone to burn them, but figured somebody might have a junk board and can mail out these 2 roms for some $ $ $.

also need a button for a cocktail nintendo control panel, while you're digging thru that barn/shed/storage bin.

i might shove a pacman rom in there. curious to see how ms pacman will deal with ladders and kong.

chasing an annoying line issue. the Braze Tech guide says chip 3P (2716) is bad. i don't even have a 3P location on my 4 board stack. but the 5H and 5K have leg issues, so replacing them is a must-do.

[Neilhdz]

Actually... i may have the button. Need to check in storage

[k7]

awesome. 

[WannaTheater]

I have one orange and two blue buttons that I just replaced from DKJr.
The blues are pretty grungy and off color (I didn't try to clean them up).
The orange color is pretty good.  And would probably shine up nicely with some Novus.

[k7]

I have one orange and two blue buttons that I just replaced from DKJr.
The blues are pretty grungy and off color (I didn't try to clean them up).
The orange color is pretty good.  And would probably shine up nicely with some Novus.

from an upright or cocktail? the cocktail buttons are different.

[WannaTheater]

They are from an upright.
I thought buttons were buttons.... my bad.

[k7]

They are from an upright.
I thought buttons were buttons.... my bad.

still a thank you from me.

the c/t buttons are like this:

[DanielR]

Hello K7. I recently purchased 10 DK eprom sets and don’t mind giving you a complete one but don’t see a 5H or 5K. It says here that Radar scope boards converted to DK could be different ones or is a 4 board.

https://www.brasington.org/arcade/tech/dk/

If you can use a regular 2 board set, let me know it’s free for you.

[k7]

awesome daniel, thank you. the board in my cocktail is a TKG-3 revision, 4 board stack. i think that's why chips and other help from the braze site is leading me in circles.

i think a tkg-3 board is legit donkey kong...but that's an assumption. i'm not sure how they marked the radarscope PCBs from nintendo.

i took 5H and 5K off my video board...they were marked as such. i wonder if i can figure out what they would relate to on a 2 board stack. or in your rom kit.

PM sent.

[HammysHangout ( Hammy )]

neil is the dk tech god, he should be able to fix it

he was doing a video stream last night of his skillful use of needle nose pliers

[Neilhdz]

neil is the dk tech god, he should be able to fix it

he was doing a video stream last night of his skillful use of needle nose pliers

And i got the job done

Also k7 ... dannys roms will work. Heres the set up.

[k7]

nice. different from the brasington link i checked out.  and sweet. there's the "missing" 3P location i could not convert to a 4 board stack version's location. friggen awesome.

but rusty 5H and 5K no es bueno...i learnt, as junior tech, when you lose leg...swim from shark no work so well. you do circles.

you find button now? 

[HammysHangout ( Hammy )]

And i got the job done

See! you are good for something

[Don Panetta aka 404]

 The nintendo button caps look exactly like the Taito button caps. I Looked in my box of junk in the garage. I found a taito red one if you want to give it a try. Free of course

[k7]

 In London (it’s too proper over here,  so I had to come over and mess things up for them)

so slow to respond… Thank you

I’ll PM you my address… And take care of postage when I get back in town