party zone owners can you help with a pic please

[busa32927]

hey gang

I was hoping you could help me out. I am repairing a party zone pin.  I am trying to replace and validate how the coil for the dj mouth is wired.  Currently it has lamp wire soldered there and I am going to replace it.  there is a purple orange and a purple yellow wire if my memory is correct.  If someone could post a pic or email me a pic of the coil and the wires i would greatly appreciate it.  I check the manual and it doesnt really specify the orientation.

Thanks

[FUNWIZ]

Since the diodes are located elsewhere, it doesn’t really matter which wire you put on the coil, however, mine has the purple/yellow wire on the left side and the purple/orange is on the right and the coil is mounted lugs up.  I changed my wiring to zip wire so it’s more flexible, heavier duty and much longer so it can move around more.

[FUNWIZ]

Pix- says it takes all these file types, apparently it won’t take any of these listed…
Allowed file types: doc, gif, jpg, pdf, png, txt, zip
Restrictions: 10 per post