Parts and Stuff For Sale - Can Bring to Auction

[holokid]

I'm trying to clear out some old, unused, unwanted stuff, so here it is....I'll be going to the August SA auction, so I can bring a major of these parts with if needed.  PM me with questions or interest in items...I'll edit the list if something becomes unavailable.

--------------------------------------------------------------
Images of the below items are available here.
http://picasaweb.google.com/108254075629302879025/Arcade_Parts?feat=directlink

Unused t-molding (blue and black leather)--
 blue (3ft) - $1.50
 blue (15.5ft) - $7.50
 blue (21ft) - $10
 black leather (6.5ft) - $3
 black leather (6ft) - $3

Atari Tempest HV Unit (untested) - $20
Atari Tempest Power Supply (no Big Blue cap) - $20

Ms. Pacman Wiring harness, power supply and isolation transformer - $50
(2) Ms. Pacman daughter board plates - $2 each
Ms. Pacman marquee light fixture - $5
Ms. Pacman Bezel - $25
Ms. Pacman (Midway) monitor brackets - $10
Ms Pacman (Midway) top marquee bracket - $5
Ms. Pacman (Midway) coin door (rounded) bracket - $10

Galaga Harness with additional hardware including power transformer (harness has been cut where power supply is attached). = FREE - Rob

Midway Galaga Rapid Fire P.C. PC PCB - A082-91410-A000 (untested) - $15
(2) Midway Credit Mult. Bypass P.C. BRD - A082-91109-A000 (untested) - $5 each

Jamma to Galaga Adapter (untested) - $25 - Sean

Multicade Bezel (new) - $45

Mystery Bezel Border - FREE

Midway Power Transformer - $10

Joust Cocktail parts (stripped cabinet) - CPO, coin door overlay, glass, all cabinet hardware (no boards) - $125

Marquees (good condition) --
Wizard of Wor - $20
Ms Pacman - $20
SuperBike - $10

Empty G07-CB0 chassis bracket - $5 - Rob

Custom Midway control panel with joystick - $15

10 slot fuse block (new) - $5

Workshop extension lamp with magnifying glass (new - needs bulb) - $40

CRT monitors--
(2) 19" Dell M992 black flat screen CRT computer monitors (these contain flat screens and are not rounded like an arcade monitor) - $25 each - Jeff Scott
(1) 17" NEC AccuSync 700 black CRT computer monitor - $20

PCBs--
Ms. Pacman PCB (working with speed chip) - $75
Rampage World Tour (working - intermittent sound issue) - $40
Street Fighter II with kick harness (working) - $40
Street Fighter the Movie (working - no harness) - $50
Capcom Bowling (working) - $25 - Ron D. (Curly)
Baby Pacman MPU (non-working - acid damage) - $25

http://picasaweb.google.com/108254075629302879025/Arcade_Parts?feat=directlink

[owlnonymous]

For the Ms. Pacman misc. parts - is the coin bucket bracket complete, IE everything I need to mount my coin bucket in my ms?

ref: http://picasaweb.google.com/108254075629302879025/Arcade_Parts?feat=directlink#5503223127586001666

[TheBatman]

Chad,

I'll take both of these, thanks!

(2) 19" Dell M992 black flat screen computer monitors - $25 each

[holokid]

For the Ms. Pacman misc. parts - is the coin bucket bracket complete, IE everything I need to mount my coin bucket in my ms?

ref: http://picasaweb.google.com/108254075629302879025/Arcade_Parts?feat=directlink#5503223127586001666

The coin door bracket is one single piece, it mounts using (4) carriage bolts...so, yes, it's complete.

[iammud]

How hard is it to score a harness for that SF:TM board? Something is driving me to want to own what is possibly the worst fighting game ever made!

[HFK]

How hard is it to score a harness for that SF:TM board? Something is driving me to want to own what is possibly the worst fighting game ever made!

Do you have a Jamma game? If so you already have the harness, for the most part. It is Jamma+ but all that is is a few more wires going to buttons from the board. Unless he got another this used to be my board and I can say it works 100% and actually is not that bad a game. The graphics are decent at least and you get to play as Jean Claude and Steve Sagat is even there.

[holokid]

Please buy my junk!!!  I thought I'd throw this back out there since it's been awhile and the auction is approaching.    I can bring anything and everything to Orlando this Saturday.

[holokid]

One last bump before the auction.  See you all tomorrow!

[Ron Donohue]

Can you please bring the CapCom bowling board?  I have a game with a bad board and would like to replace it.  I will ask around and see if anyone can pick it up at the auction and bring it down.  I should post who will pay you for it and take it within the next few hours.

Ron

[holokid]

Can you please bring the CapCom bowling board?  I have a game with a bad board and would like to replace it.  I will ask around and see if anyone can pick it up at the auction and bring it down.  I should post who will pay you for it and take it within the next few hours.

Ron

That's fine, Ron.  PM me with the details.  Thanks.

[ibis]

Ron, Chris is coming to the auction but if he can not do it, I will be passing you this coming Thursday.

[Ron Donohue]

I put in a call to Chris but have not heard back.  Pretty sure he or Mojo can do it although I very much appreciate the offer.  I hope you can stop by for a few games when you are in town.  Let me know.

[ibis]

Let me know if they can not do that for you and I will pick it up for you.  I will call but will depend on schedule.  Can you duck from work a little early?  I am going to the first home game and will be hosting the tail gate so need to get down there early afternoon.  I could stop by and maybe play a bit if your schedule allows it.

[Ron Donohue]

My schedule can be very flexible for you.  Let me know what works for you.  Also, thanks for the offer but Curly will be taking care of the board for me.  I sent Chad a PM to let him know.